金頓科技股份有限公司

金頓科技專精於振動、衝擊、環境試驗儀器，自西元1983年以來已經歷數二十年的歷史，累積豐富的經驗，並得到許多廠商的信賴及支持。 金頓科技盡一切努力，提供相各方面卓越的生產製造與服務，給予我們的全體客戶，並建立長期互惠的良好關係。 金頓科技國家級測試實驗室，提供兩岸三處標準代測服務，完整的建立客戶與產品間所需可靠度標準。

Customized sand/ dust test chambers

提供Customized sand/ dust test chambers的詳細產品服務資訊，包括型號、名稱、敘述和規格。我們秉持著精益求精及高品質保證，提供一系列實用且價格合理的Customized sand/ dust test chambers產品，並以多年的豐富經驗及技術獲得國內外客戶讚許及肯定，若您有任何採購需求，歡迎與我們聯絡。
目錄 > ACS > Customized sand/ dust test chambers
Customized sand/ dust test chambers

Customized sand/ dust test chambers

Products are exposed to several atmospheric agents and to changes in temperature and humidity during their service life. Sand also produces a high degree of deterioration.

ACS chambers for sand and dust tests are able to reproduce all the conditions included in the standards that require continuous ventilation (DIN 40046, MIL-STD 331 AND MIL-STD 810 C), dust drop tests (DIN 40052) and tests with irregular whiff of compressed air (SAE J 575).

In addition to the standard line, ACS is able to offer customized solutions thanks to its more than 60 years of experience in designing customized environmental simulation chambers, its technical know-how and the close attention given to the requests of all our customers.
功能說明 :

FEATURES:

Example of a chamber customized according to the specifications requested by the customer.

Dust and sand test chamber SD48000 MIL, for reliability tests and product certification in compliance with the following standards:

  • MIL STD 810G Method 510.5. Procedure I and II
  • RTCA DO-160G section 12.90 Sand and Dust
  • Outside dimensions: 20000 x 10000 x 5000 mm (LxDxH)
  • Maximum object test size: 1500 x 7500 x 1500 mm (LxDxH)
  • Chamber useful capacity: 48400 l.
  • Inside working dimensions: 10000 x 2200 x 2200 mm (LxDxH)
  • Application: reproducing the strong presence of sand/dust with wind effect

Method MIL STD 810G 510.5. PROCEDURE I – BLOWING DUST

  • Temperature range: from ambient T to +70°C
  • Rate of temperature change: <3°C/min, from 0°C to +70°C
  • Relative humidity: <30%
  • Dust composition: Chinese red clay or silica flour
  • Dust concentration: 10.6 ±7 g/m3 (0.3 ±0.2 g/ft3).
  • Air speed: 1.5 to 8.9 m/s

Method MIL STD 810G 510.5. PROCEDURE II – BLOWING SAND

  • Temperature range: from ambient T to +70°C
  • Temperature fluctuation (under stable conditions): ≤ ±1°C (over time)
  • Relative humidity: ≤30%
  • Sand composition: silica sand
  • Sand concentration:
    • 0.18 g/m3 -0.0/+0.2 g
    • 1.1±0.3 g/m3
    • 2.2±0.5 g/m3
  • Air speed: 18 to 29 m/s

SOFTWARE:

The software for this type of chamber is an application that includes all the functions based on the specifications requested by the customer. The chamber has a built-in control panel for controlling and managing its functions. The chamber can also be controlled remotely using the WinKratos software or an equivalent application.


RANGE:

ACS can provide customized solutions that are adapted to the requests of every customer. Thanks to its accurate analysis of testing needs and highly specialized technical consultancy, ACS designs and manufactures environmental simulation chambers in the configuration most suitable for meeting the customer's testing needs.

發送詢價訊息
聯絡人資料
Change Image

當您提交後，即表示您同意我們的《隱私權與 Cookie 政策》。

金頓科技股份有限公司以顧客滿意服務為宗旨，提供專業的Customized sand/ dust test chambers諮詢與服務。歡迎您透過上述表單將Customized sand/ dust test chambers的洽詢需求傳送給我們，我們會儘快與您聯絡。若您對於其他產品服務有任何採購需求，亦可來信或來電洽詢，我們會提供最優質服務並且立即解決您的問題。