金頓科技股份有限公司

金頓科技專精於振動、衝擊、環境試驗儀器，自西元1983年以來已經歷數二十年的歷史，累積豐富的經驗，並得到許多廠商的信賴及支持。 金頓科技盡一切努力，提供相各方面卓越的生產製造與服務，給予我們的全體客戶，並建立長期互惠的良好關係。 金頓科技國家級測試實驗室，提供兩岸三處標準代測服務，完整的建立客戶與產品間所需可靠度標準。

Climatic Dyno chambers

提供Climatic Dyno chambers的詳細產品服務資訊，包括型號、名稱、敘述和規格。我們秉持著精益求精及高品質保證，提供一系列實用且價格合理的Climatic Dyno chambers產品，並以多年的豐富經驗及技術獲得國內外客戶讚許及肯定，若您有任何採購需求，歡迎與我們聯絡。
目錄 > ACS > Climatic Dyno chambers
Climatic Dyno chambers

Climatic Dyno chambers

The climatic chambers coupled with road dynamometers are produced by ACS in collaboration with leading companies in dynamometer technology.

This type of climatic chamber makes it possible to test the efficiency of the engine compartment under climatic stress during the typical working cycles of a vehicle according to international automotive standards. If an appropriate exhaust gas collection and analysis system is installed, the equipment can be used to perform emission tests.

ACS is able to offer customized solutions thanks to its more than 60 years of experience in designing customized environmental simulation chambers, its technical know-how and the close attention given to the requests of all our customers.
功能說明 :

FEATURES:

Example of a chamber built according to customer specifications.

  • Temperature range: -35°C/+40°C
  • Rate of temperature change (average value, with and without thermal load):
    • 0.2K/min during heating from -35°C to +40°C.
    • 0.2K/min during cooling from +40°C to –35°C.
    • 0.5K/min during heating from -20°C to +40°C.
    • 00.5K/min during cooling from +40°C to –20°C.
  • Nominal inertial thermal load: 2 cars weighing about 1800 kg
  • 4x4 roller bench with a mass of about 15,000 kg. It is partially considered as an inertial thermal load
  • Humidity control range: 20% to 95% R.H. (max R.H. at 40°C: 60%)

The thermoclimatic chamber responds to the typical characteristics of equipment suitable for automotive testing (as defined in Directive 70/156/EEC with a reference mass not exceeding 2610 kg); it guarantees cooling gradients consistent with the need for rapid changes in temperature and maintenance of the set point for testing at low temperatures; at the same time it guarantees the environmental conditions, in terms of temperature and humidity, according to Directive 70/220/EEC and subsequent amendments. The chamber is suitable to be used for regulated emission tests.

  • Chamber internal working volume: 360 m3

SOFTWARE:

The software for this type of chamber is an application that includes all the functions based on the specifications requested by the customer. The chamber has a built-in control panel for controlling and managing its functions. The chamber can also be controlled remotely using the WinKratos software or an equivalent application.


RANGE:

ACS can provide customized solutions that are adapted to the requests of every customer.

Thanks to its accurate analysis of testing needs and highly specialized technical consultancy, ACS designs and manufactures environmental simulation chambers in the configuration most suitable for meeting the customer's testing needs.

發送詢價訊息
聯絡人資料
Change Image

當您提交後，即表示您同意我們的《隱私權與 Cookie 政策》。

金頓科技股份有限公司以顧客滿意服務為宗旨，提供專業的Climatic Dyno chambers諮詢與服務。歡迎您透過上述表單將Climatic Dyno chambers的洽詢需求傳送給我們，我們會儘快與您聯絡。若您對於其他產品服務有任何採購需求，亦可來信或來電洽詢，我們會提供最優質服務並且立即解決您的問題。