KING DESIGN

KING DESIGN is the expert in the field of Vibration, shock, and the environment test Equipment; since 1983 King Design has established the technique knowledge in the field and won many enterprises' confidence and support. The brief features of King Design's service provided are listed as follows: Equipment Sales Service, CNLA Laboratory Service, Vibration Diagnostic and Structure improvement consultant, Environment Stress Screen (ESS).

Damp-Heat Tester

KING DESIGN continually develops the innovative Damp-Heat Tester to meet the various market demands and bring multiple benefits to customers always. Our Damp-Heat Tester are highly demanded by our clients across the country for optimum quality. In order to ensure longer service life and reliability, our products are manufactured by our vendors using the best quality raw material and latest technology. Whether you need a Damp-Heat Tester, or Damp-Heat Tester, KING DESIGN manufactures cost-effective products.
Categories > PV Test Equipment > Damp-Heat Tester
Damp-Heat Tester

Damp-Heat Tester

  1. Technical index:
    1. Power: 380V, 3-, 50/60HZ 110A
    2. Temperature range: 50°C~120°C
    3. Humidity range: 20%~95% RH
    4. Accuracy: 1) temperature ± 0.3°C；2) humidity ± 2.5% RH
    5. Uniformity: 1) temperature ± 2.0°C；2) humidity ± 3.0% RH
    6. Uniformity test: measured at T=85°C, RH=85%; set 9 points for temperature measurement and 2 points for humidity.
    7. Inner wall is above 50 cm; within 20 min after temperature/humidity meets the setting value, the distribution uniformity of temperature/humidity can meet the aforesaid requirement.

Features :

    1. Temperature descending speed (idle run): no less than 3°C/min. Temperature ascending speed (idle run): no less than 3°C/min.
    2. Sample load 400kg: temperature rise – no less than 2.0°C /min; in the range of -40°C ~ +85°C.
    3. Temperature down－no less than 2.0°C/min; in the range of -40°C ~ +85°C.
    4. Humidity: follow IEC 61646-10.12 to make wet refrigeration test; if temperature rises up for 100°C per minute, when 85°C is reached, wait for 10 min. and humidity shall reach 85%RH ± 5%RH.
    5. Dew point temperature range: 10°C to +85°C
    6. Test space: 200 x 250 x 280 (W x H x D) cm double door, outer chamber size: 220 x 290 x 430 (W x H x D) cm
    7. Accept customized order.
  1. Itemized Introduction
    2. Material Applied:
    1. Inner/outer wall materials: apply SUS#304 plate.
    2. Insulation material: imported high-strength PU foamed insulation material.
    3. Condensate-proof parts: use K-type tube’s heating energy and membrane-type electrical heatig wire to prevent condensate.
Control System: apply OYO U8256; the RS232 interface can connect to PC and perform setting of temperature curveand temperature recording during test run. The touch-type T.F.T. LCD digital PLC or equivalent can perform 1200-point mode. Refrigeration system: use imported power-saving closed-type compressor. Heating System: apply SUS304 fin-type heating tube to heat up. The temperature up/down and humidity up/down system are completely independent. Protection devices: use fuse-free protection switch; equipped with pressure and explosion protection devices. Airflow circulating system: apply multi-blade fan, sealed-type motor, vertical proliferation, horizontal air-exchange and curved air circulation. Attachments:
  1. Double-layer high-pressure, low-temperature-resistant silicon packing
  2. An external-connected test hole
  3. Vacuum glass window inserted with fog-removing wires
  4. Isolated-type PL-style high-luminance lighting
  5. A set of RO pure water system; 1/4"; 1.5L/min.
Water Demanding: 30-ton cooling towers or chilled water unit; water temperature is less than 70C; 30L/min. Water Supply and Return Pipe Diameter: 2” hard PVC

Send Message
Contact Information
Change Image

By submitting your contact information, you acknowledge that you consent to our processing data in accordance with the Privacy and Cookie Policy.

KING DESIGN is the leading supplier of Damp-Heat Tester in Taiwan and the surrounding areas. We carry inventory all the time so you’re sure we’ll have your order ready whenever you need it. We can manufacture Damp-Heat Tester that meet specific technical requirements. KING DESIGN has tailored our customer service department, product designs, technical support as well as all other company departments to serve the ultimate goal of upholding the highest standards in customer satisfaction. We appreciate the opportunity to attract your attention and value your feedback.