High-acceleration shock tester, DP-1200-18
High-acceleration shock tester
Conform to different test specs such as JESD22-B110 and IEC spec.
High repeatability on consecutive shock; acceleration +/- 10%; run time +/- 15%; speed deviation +/- 10%.
Table’s four corner-points uniformity P160mm +/- 10%.
Can add spring system to reach the requirement of extra high acceleration specification.
Using high-efficiency vibration-absorbing seat pad can block out possible floor resonance and protect the factory structure.
Easy in operation; no complicate training course required.
Module shock rubber-pads are applied per different standards independently. And the rubber-pad lifetime can be prolonged.
While a non-repetitive mechanical shock environment is encountered, find out the mechanical weakness and decay of specific functions. Basically simulate the consequence of random shock possibly encountered during transporting or operation process. While running a shock test, normally fix the specimen on fixture or testing table; wave model frequently selected per specification is the half-sine wave.
Table Size (mm2)
Table Weight (kgw)
Peak load (kgw)
Shortest Acting Time(mS )
Peak acceleration (g )
Maximum Acting Displacement (mm)
Required Voltage Supply
220V, 3Φ, 16A
Required Air Pressure Supply(kg/cm2)
Staying Time (mS)
Speed-change Rate (△V cm/s) 2900