Taipei Lab
Service Item |
Location |
||
| 1.Vibration test 2.Shock test 3.Drop test 4.Jumping test 5.Dynamic analysis 6.Calibration 7.Temperature & humidity test 8.Carton pressure-resisting test |
5F, No.3, Lane. 270, Sec. 3, Beishen Rd., Shenkeng Dist., New Taipei City 222 Taiwan TEL:+ 886 2 2662 5100 FAX:+ 886 2 2662 3094 E-mail：service@kdi.tw Map: (click to enlarge it)  |
| Maximum thrust | 400gF |
| Frequency range | 2~2000Hz |
| Maximum Acceleration | 30g |
| Maximum displacement | 30mm |
| Maximum speed | 190cm/sec |
| Maximum load | 80kgw |
| Box internal size | 50× 55× 75 cm |
| Test temperature | -40 ℃ ~120℃ |
| Test humidity | RH15% ~ 98% |
| Model No. | KD-128A |
| Swing arm type | Single arm |
| Executable fall height | 300 ~ 1300 mm |
| Maximum test load | 80 kg |
| Maximum test volume | 1400(w) × 600(d) mm |
| Buffer means | Hydraulic buffer |
| Control means | Wire control |
| Test waveform | TP3 /DAS-105 measurement sine wave |
| Bottom Size | 1100 × 850 mm |
| Maximum load | 10 kgw |
| Test height | 0~1800 mm |
| Model No. | TSK-A4H++ |
| Maximum volume | 500 × 400 × 400 mm |
| High temperature | 150 ℃ |
| Low temperature | -65 ℃ |
| Temperature recovering time | ≦ 5 min. |
| Model No. | TMJ-9712C |
| Maximum temperature change rate | 1℃/min |
| Maximum volume | 950 × 750 × 1000 mm |
| High temperature | 100 ℃ |
| Low temperature | -40 ℃ |
| Humidity | 10% ~ 95% RH |
| Test Waveform | Sine wave |
| Table size | 6000 × 600 mm |
| Test range | m/s2(g) mS |
| 100(10) 16 | |
| 150(15) 6 | |
| 250(25) 6 | |
| 400(40) 6 | |
| 1000(100) 2 |
| Start angle | 5~90o (angle toward bottom’s horizontal direction is 0 o) |
| End angle | 90~180o (angle toward bottom’s horizontal direction is 0 o) |
| Maximum acceleration | 30g |
| Open speed (Deg/s)(Deg/s) | Setting range 0~150o/S |
| Close speed (Deg/s) | Setting range 0~150o/S |
| Open-pause time | 0~999(sec) |
| Close-pause time | 0~999(sec) |
| Executable Maximum laptop size | 310 mm(L) × 420 mm(W) |
| Load | 2000kg |
| Testing speed | 5~100mm/min |
| Maximum sample size | 100 cm(L) × 100 cm(W) |
| Testing frequency | 0 to 20k Hz |
| Distance Measurement | 30m |
| Measurement points | Above 1,000 points |
| Model No. | EM-1000F2K-50N250 | EM-600F2K-40N120 |
| Type of vibration | sinusoidal, random, impact simulation | sinusoidal, random, impact simulation |
| Frequency range | 1~2000 Hz | 2~3000 Hz |
| Maximum acceleration | 66 g(No Payload) | 50 g(No Payload) |
| Maximum displacement | 50 mm | 40 mm |
| Maximum load | 250 kg | 120 kg |
| Maximum size of test object | 600 mm × 600 mm | 600 mm × 600 mm |
| Test direction | vertical and horizontal | vertical and horizontal |
| Model No. | DP-1200-60 | DP-1200-25 |
| Executable waves | half sine wave, square wave, saw-tooth wave | half sine wave, square wave, saw-tooth wave |
| Measurable channels | 4 channels (1 for control +3 for measurement) | 4 channels (1 for control +3 for measurement) |
| Table size | 600 × 600 mm | 250 × 250 mm |
| Peak acceleration | 500 g (accommodate the impact amplifier the peak acceleration can be up to 3000g) | 250 g |
| Measuring software | TP-3、DAS-105 | TP-3、DAS-105 |
| Testing Frequency | 1 to 4000Hz |
| Maximum Displacement | 0 to 50mm(peak-peak) |
| Maximum Acceleration | 50g Peak |
| Pallet Loading | 400kgw |
| Model No. | KD-500 |
| Swing arm type | Multi-arm type |
| Executable fall height | 10~800mm |
| Maximum test load | 300 kg |
| Maximum test volume | 1300(w) × 1150(d) mm |
| Buffer means | Hydraulic buffer |
| Control means | Wire control, PLC circuit control |
| Model No. | THS-D4H+-150 |
| Maximum volume | 100 × 80× 100 mm |
| High temperature | 150 ℃ |
| Low temperature | -45 ℃ |
| Test temperature | RH15% ~ 98% |
| Mode No. | TMJ-9709 |
| Maximum temperature change rate | 5-minute average temperature |
| Maximum volume | 500 × 400 × 400 mm |
| High temperature | 150 ℃ |
| Low temperature | -50 ℃ |
| Executable specification | CHS,MIL,IEC,JIA and other international standards |
| Accelerometer Calibration System |
|
| Test equipment | Test range |
|
Accelerometer Calibration System
|
Voltage sensitivity:
0.1mV/g to 1,000 mV/g Calibrate frequency point: 50 Hz 100 Hz 300 Hz 500 Hz 1,000Hz 2,000Hz 3,000Hz 4,000Hz |