Kunshan Lab
| Test Waveform | Sine wave |
| Table size | 700 × 500 mm |
| Test range | 5~100Hz |
| Amplitude | 0.35~2.5 mm |
| Frequency mode | Linear, logarithmic, octave, random |
| Model No. | KD-128A |
| Swing arm type | Single arm |
| Executable fall height | 300 ~ 1300 mm |
| Maximum test load | 80 kg |
| Maximum test volume | 1400(w) × 600(d) mm |
| Buffer means | Hydraulic buffer |
| Control means | Wire control |
| Model No. | TMJ-9712 |
| Maximum temperature change rate | 1℃/min |
| Maximum volume | 950 × 750 × 1000 mm |
| High temperature | 100 ℃ |
| Low temperature | -40 ℃ |
| Humidity | 10% ~ 95% RH |
| Model No. | THS-D4H+-150 |
| Maximum volume | 100 × 80× 100 mm |
| High temperature | 150 ℃ |
| Low temperature | -45 ℃ |
| Test temperature | RH15% ~ 98% |
| Model No. | TSK-A4H++ |
| Maximum volume | 400 × 350 × 300 mm |
| High temperature | 150 ℃ |
| Low temperature | -65 ℃ |
| Temperature recovering time | ≦ 5 min. |
| Maximum thrust | 600gF |
| Frequency range | 2~3000Hz |
| Maximum Acceleration | 50g |
| Maximum displacement | 40mm |
| Maximum speed | 220cm/sec |
| Maximum load | 120kgw |
| Box internal size | 1000 × 800 × 1000 mm |
| Test temperature | -40 ℃ ~150℃ |
| Test humidity | RH10% ~ 98% |
| Model No. | EM-2000F2K-50N250 | EM-1000F2K-50N250 | EM-600F2K-40N120 |
| Type of vibration | sinusoidal, random, impact simulation | sinusoidal, random, impact simulation | sinusoidal, random, impact simulation |
| Frequency range | 1~2000 Hz | 1~2000 Hz | 2~3000 Hz |
| Maximum acceleration | 100 g(No Payload) | 66 g(No Payload) | 50 g(No Payload) |
| Maximum displacement | 50 mm | 50 mm | 40 mm |
| Maximum load | 500 kg* | 250 kg | 120 kg |
| Maximum size of test object | 1,400 mm × 1,200mm | 750 mm × 750 mm | 600 mm × 600 mm |
| Test direction | vertical and horizontal | vertical and horizontal | vertical and horizontal |
| Model No. | DP-1200-100 | DP-1200-60 | DP-1200-25 |
| Executable waves | half sine wave, square wave, saw-tooth wave | half sine wave, square wave, saw-tooth wave | half sine wave, square wave, saw-tooth wave |
| Measurable channels | 4 channels (1 for control +3 for measurement) | 4 channels (1 for control +3 for measurement) | 4 channels (1 for control +3 for measurement) |
| Table size | 1000 × 1,000 mm | 600 × 600 mm | 250 × 250 mm |
| Peak acceleration | 500 g (accommodate the impact amplifier the peak acceleration can be up to 3000g) | 500 g (accommodate the impact amplifier the peak acceleration can be up to 3000g) | 250 g |
| Measuring software | TP-3、DAS-105 | TP-3、DAS-105 | TP-3、DAS-105 |
| Test Waveform | Sine wave |
| Table size | 600 × 600 mm |
| Test range | m/s2(g) mS |
| 100(10) 16 | |
| 150(15) 6 | |
| 250(25) 6 | |
| 400(40) 6 | |
| 1000(100) 2 |
| Model No. | KD-500 |
| Swing arm type | Multi-arm type |
| Executable fall height | 0~80cm |
| Maximum test load | 300 kg |
| Maximum test volume | 1400(w) × 1400(d) mm |
| Buffer means | Hydraulic buffer |
| Control means | Wire control, PLC circuit control |
| Test waveform | TP3 /DAS-105 measurement sine wave |
| Bottom Size | 1100 × 850 mm |
| Maximum load | 10 kgw |
| Test height | 0~1800 mm |