WORLDWIDE

English

Japanese

Russian

KING DESIGN
KING DESIGN is the expert in the field of Vibration, shock, and the environment test Equipment; since 1983 King Design has established the technique knowledge in the field and won many enterprises' confidence and support. The brief features of King Design's service provided are listed as follows: Equipment Sales Service, CNLA Laboratory Service, Vibration Diagnostic and Structure improvement consultant, Environment Stress Screen (ESS).

This is the detailed information for Hail Impact Tester. The information includes model, name, description and specification for Hail Impact Tester. Related Keywords : Hail Impact Tester

Hail Impact Tester

Categories > PV Test Equipment > Hail Impact Tester

Product Name :

Hail Impact Tester

Description

As a fact that solar panels or related equipment are placed under direct sunlight outdoors without shelter, they are vulnerable to the effects of climate change causing aging and damage; such as when under hail strike, solar panels or equipment are easy to be damaged from hail hits.. This tester can simulate the impact of hail falling onto your products; and you can adjust the products to facilitate them with the best quality and reliability in the market.

Features :

Hail Impact Tester

Complies with IEC 61215, IEC 61646 Hail Test Specification

Test application for Solar cell, LED module, LCD module, Outdoor panel

Air-fired hails, digital display, pressure adjustment, wired remote control

Laser positional instruction, X/Y axial manually adjustable

Two high-speed laser detection module, launching speed is 15~40 m/sec ±5%

The largest test size is 220 × 260cm, can be customized as request

Velocity sensor is around 50cm from the surface of testing module

Product Specification

Hail diameter：25.0 mm ±2% (adjustable)

Hail weight：7.53 g ±2%

Hail mold：12 pc/ set

Storage container：One set

Launching speed：15~40 m/sec ±5% (adjustable)

Launcher meas.：L400 x D 270 x H 267 cm

Launcher weight：850 kg

Power demand：AC 100~230V/2A 50-60Hz

Air demand：5 ~ 8 kg/cm2

Please send your Inquiries for Hail Impact Tester to us. We will contact you soon. Please also check out the related products below.

Related Products :

Categories > PV Test Equipment > UV Preconditioning Tester

Categories > PV Test Equipment > Mechanical Load Tester

Categories > PV Test Equipment > Class AAA Steady State Solar Simulator

Categories > PV Test Equipment > Module Breakage Tester

Categories > PV Test Equipment > Bypass Diode Thermal Test System

Categories > PV Test Equipment > Robustness of Terminations Tester

Categories > PV Test Equipment > Thermal Cycling and Humidity-Freeze Test

Categories > PV Test Equipment > Damp-Heat Tester

Categories > PV Test Equipment > Terminal Box Knock Out Tester

Categories > PV Test Equipment > Cut Susceptibility Tester

Categories > PV Test Equipment > Conduit Bending Tester

Categories > PV Test Equipment > Wet Leakage Current Test

Categories > PV Test Equipment > LED Sun Simulator


Hail Impact Tester
	Complies with IEC 61215, IEC 61646 Hail Test Specification
	Test application for Solar cell, LED module, LCD module, Outdoor panel
	Air-fired hails, digital display, pressure adjustment, wired remote control
	Laser positional instruction, X/Y axial manually adjustable
	Two high-speed laser detection module, launching speed is 15~40 m/sec ±5%
	The largest test size is 220 × 260cm, can be customized as request
	Velocity sensor is around 50cm from the surface of testing module

Product Specification
	Hail diameter：25.0 mm ±2% (adjustable)
	Hail weight：7.53 g ±2%
	Hail mold：12 pc/ set
	Storage container：One set
	Launching speed：15~40 m/sec ±5% (adjustable)
	Launcher meas.：L400 x D 270 x H 267 cm
	Launcher weight：850 kg
	Power demand：AC 100~230V/2A 50-60Hz

	Air demand：5 ~ 8 kg/cm2